Complete More Deliveries & Get In And Out Faster.
The Loadmac 255 Ultra 2-Way helps your fleet unload quickly, preserve more legal payload, and handle deliveries with a compact, easy-to-run machine built for real jobsites.
When space is tight, time is limited, and every stop needs to move fast, the 255 2-Way gives your drivers the reach, simplicity, and control to get in, unload, and get back on the road.
CAPACITY
5,500 lbs
REACH
40″
LIFT
10′ (120")
STEERING
2-Way
Stop Letting Tight Jobsites Slow Everything Down
Standard setups don’t just waste time. They make tight deliveries harder, reduce efficiency, and force your drivers to work around limitations instead of getting the job done.
- Losing valuable payload to heavier forklift setups that reduce your margins
- Struggling to maneuver bulky equipment in tight or restricted job sites
- Frustrating drivers with awkward climbs and hard-to-use machines
- Slowing down operations with complicated controls and hard-to-train equipment
- Risking downtime when service, training, or parts are hard to find
Unload Faster. Fit Anywhere. And Stay On The GO
The 255 2-Way is built for compact performance—helping your fleet move faster, fit tighter spaces, and complete every delivery with confidence.
- Lighter machine, but with more stability—preserving more legal payload on every run
- Compact with a low-center design that keeps loads stable & easy to maneuver at full capacity
- Man-on-ground mounting for safer, faster everyday use
- No complex electronics - just reliable, easy-to-run equipment that keeps drivers moving
- U.S. support, hands-on training, and ready access to parts
Drivers arrive, unload, and move on.
5,500 lbs
Capacity
40″
Lift height
10′ (120″)
All the numbers your service and ops teams need.
Performance & Capacity
| Table Header | Table Header | Table Header | Table Header |
|---|---|---|---|
|
Rated Capacity |
5,500 lbs |
||
|
Maximum Reach |
40″ |
||
|
Lift Height |
Up to 10′ (120″) |
||
|
Gradeability |
49% |
||
|
Travel Speed |
7.5 MPH |
Engine & Powertrain
| Table Header | Table Header | Table Header | Table Header |
|---|---|---|---|
|
Engine Make |
Kubota |
||
|
Horsepower |
25 HP |
||
|
Cylinders |
3 |
||
|
Fuel Type |
Diesel |
||
|
Drive System |
Hydrostatic |
||
|
Emission Standard |
EPA Tier 4 Final |
||
|
Max Engine RPM |
2,600 |
Dimensions & Weight
| Table Header | Table Header | Table Header | Table Header |
|---|---|---|---|
|
Overall Length (w/ 48″ forks)
|
87″ |
||
|
Overall Width
|
90″ |
||
|
Overall Height |
97″ |
||
|
Wheelbase
|
61″ |
||
|
Turning Radius |
61″ |
||
|
Unladen Weight |
4,495-4,880 lbs |
Forks, Reach & Mast
| Table Header | Table Header | Table Header | Table Header |
|---|---|---|---|
|
Mast Type |
Fixed w/iR |
||
|
Mast Travel |
0″ |
||
|
Reach Extension |
40″ |
||
|
Total Forward Reach
|
40″ |
||
|
Fork Section |
48″ × 4″ × 2″ |
||
|
Carriage Width |
47.25″ (Class II) |
||
|
Side Shift |
6″ |
||
|
Carriage Tilt |
6.5° fwd / 12° back |
Drive, Tires & Terrain
| Table Header | Table Header | Table Header | Table Header |
|---|---|---|---|
|
Drive Wheels |
3 |
||
|
Steering |
2-Way |
||
|
Steering Type |
Hydrostatic |
||
|
Rear Steering Rotation
|
180° |
||
|
Tires (Front) |
23″ × 8.5″ – 12 ply |
||
|
Tires (Rear) |
27″ × 10.5″ – 8 ply |
||
|
Equipment Ground Clearance
|
8″ |
General Specifications
| Table Header | Table Header | Table Header | Table Header |
|---|---|---|---|
|
Operator Position |
Seated |
||
|
Frame Opening |
60″ |
||
|
Overhang
|
45.3″ |
||
|
Hydraulic Pressure |
200 / 350 bar ≈ 2,900 / 5,076 psi |
||
|
Compliance |
ANSI B56.14 |
Mount it to your truck and run.
The 255 Ultra 2-Way fits all standard mounting kits used on flatbeds for delivery to building supply, masonry, landscape, and residential routes. Compact overhang keeps your truck within length limits while preserving rear-of-truck clearance for tight backing.
Best fit for: small-to-mid size delivery fleets running standard routes, residential drops, and tight commercial sites where the 4-way’s maneuverability is more than what’s needed.
Typical fleet profiles
- Building supply (residential delivery)
- Landscape supply
- HVAC/pipe distribution
- Ag/feed delivery
- Single-vehicle owner/operators
Need more maneuverability? Look at the 4-Way.
You’re here
255 ultra 2-Way
Choose 2-Way if: your routes are standard, residential or commercial, and you want the lightest, simplest 255.
4-Way · Multidirectional
255 Ultra 4-Way
Choose 4-Way if: you handle long materials, crowded delivery zones, or restricted jobsites that demand sideways travel.
FAQ.
Will the 255 Ultra 2-Way fit my flatbed?
The 255 2-Way is designed to mount on standard flatbed trucks. With a 90″ overall width and 45.3″ overhang, it fits standard mounting kits without exceeding length limits. Our team will confirm fit for your specific truck during the workflow review.
What training do drivers receive?
Every Loadmac purchase includes hands-on operator training at delivery. Our man-on-ground design means drivers learn quickly and operate confidently from day one.
How is service handled?
U.S. support is built in. GoLoadmac’s Spencerville, IN, location provides parts, service, and operator training without the wait times common with overseas-supported brands.
How does this compare to the Moffett M4?
The 255 is a lighter, simpler, more cost-effective alternative to the M4 — preserving the same 5,500 lb capacity and adding man-on-ground mounting. We’re happy to walk through a side-by-side comparison.
What's the lead time?
Standard configurations are available on a rolling schedule. Custom mounting kits or color/branding add 4–8 weeks. Talk to a sales rep for current availability.
Built for true delivery independence.
Rethinking what truck mounted forklifts should deliver.